Payment & Shipping Terms:
|Coverage Area:||All Area In China||Inspection Arrangement:||On Call|
|Inspector Experience:||At Least 5 Years In QC Field||Discount:||Applicable For Long Project|
|Inspection Report:||Available Within 2 Days Or Per Request||Products:||Pressure Vessel|
advanced inspection services,
food inspection services
Fast response 3rd party inspection services for pumps well trained inspector with clear report
Purchase order review
Verifying compliance with order requirement (as per approved ITP)
Visual and dimension inspection
Shaft freedom and run out
Pump mounting and alignment
Dynamic balancing/Vibration&performance test
Hydrostatic and performance test certificates
Preparation for shipment
2. General technical specifications for pumps
ANSI LC 6 - Natural gas operating diaphragm pumps
ANSI/HI 3.1-3.5 - Rotary pumps
ANSI/HI 6.1-6.5 - Reciprocating pumps
ANSI/HI 7.1-7.5 - Controlled –volume metering pumps
ANSI/HI 8.1-8.5 - Direct acting pumps
API 610 - Centrifugal pumps for general refinery service
API 674 - Positive displacement pumps - Reciprocating
API 676 - Positive displacement pumps - Rotary
ASME B73.1 - Specification for horizontal end suction centrifugal pumps for chemical process
ASME B73.2 - Specification for vertical in-line centrifugal pumps for chemical process
BS EN 10204 - Metallic products - types of inspection documents
MSS-SP55 - Quality Standard for Steel Castings for Valves, Flanges and Fittings and
Other Piping Components - Visual Method for Evaluation of Surface
• BS EN ISO 15136-1 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift, pumps cd-
• BS EN ISO 15136-2 Petroleum and natural gas industries – progressing cavity pumps systems for artificial lift – part 2: surface drive systems
• ANSI/H1 M126 Submersible pump tests
• API 11R Electric submersible pump installations
• ISO FDIS 21630 PUMPS - Testing - submersible mixers for wastewater and similar applications
• API 11D2 Progressing cavity pump systems for artificial lift – pumps
• API 11D3 Progressing cavity pump systems for artificial lift-surface-drive systems
• BS EN ISO 15136-2 Petroleum and natural gas industries progressing cavity pumps systems for artificial lift - part 2: surface drive systems
• ISO 151-1 Petroleum and natural gas industries progressing cavity pump systems for artificial lift - part 1: pumps
Note: Instances will arise when not all of the above can be made available at the time the order is assigned to an Inspector. The Inspector must then obtain the information from the Vendor and particular care must be taken that drawings/specifications are the latest editions and have been approved by the Client.
|Pre-Shipment Inspection (PSI)
Production Monitoring (PM)
During Production Check (DUPRO)
Initial Production Check (IPC)
Lab test witness
Daily, weekly, monthly or per customer requirement
English report or per customer request
Report will be submitted within 48 hour after inspection finished
3. Key inspection areas
i) Pump Case Hydrostatic Testing and Repair
The Inspector should determine how the non-witnessed hydrostatic tests are conducted and when a leak is found, how it is repaired. API 610, some of the ASTM specifications and other specifications limit the type of repairs permitted. Welded repairs to Cast Iron are forbidden.
ii) Internal Cleanliness
Inspectors should assure themselves that the Vendor takes care that all pump casings; bearing housings etc. are completely clean prior to assembly. Surfaces of castings must be completely free from moulding sand, machinery scarf or any other dirt.
iii) Dynamic Balancing
Balancing of the rotating components is always important and becomes increasingly so as diameter, weight and running speed increase. The pump specification should be consulted to check whether static or dynamic balancing is required. The inspector should by observation, confirm that the Vendor's standard practice conforms to the specification requirements.
Does the Vendor have a satisfactory system for checking that correct running clearances are achieved on assembly?
v) Performance Tests
Does the Vendor conscientiously carry out tests according to Specification?
4. Our advantages
To ensure the quality and delivery of the goods to customers, INF provide professional 3rd party inspection services, all quality assurance inspector are with at least 5 years related working experiences in pressure vessel industry and all requested qualification like NDE, ASNT.
Our 3rd party inspection services network cover most area of china, inspector can attend the inspection upon customer's notification within 24 hours.